Installation Over Plywood
Interior or Exterior |
Installation Over Gypsum
Board or Concrete Panel Interior only. |
Installation Over existing brick
or block (unpainted) Interior or Exterior. |
| 1. Rigid panel (plywood) |
1. Gypsum board or Conrete Panel |
1. Galvanized metal lathe |
| 2. 15lb Building Paper |
2. Masonbond 400 or ceramix wall glue |
2. Scratch coat of Masonbond 400 or Type S Mortar and sand mix. |
| 3. Galvanized metal lathe |
3. JR Stones |
3. Apply JR Stone with Masonbond 400 or Type S mortar and sand mix. |
| 4. Masonbond 400 or Type S Mortar and sand mix. |
4. For joints, if any, Type S Mortar and sand mix. |
4. For joints, if any, Type S Mortar and sand mix. |
| 5. JR Stones |
|
|
| 6. For joints, if any, Type S Mortar and sand mix. |
|
|